The ProClip Brodit Blog

CHICAGO--(BUSINESS WIRE)--ProClip USA, Inc. today announced a Vehicle Mount Adapter designed to securely mount the Garmin Nuvifone G60 to car, truck and SUV dashboards and consoles.

Vehicle Mount Adapters, designed and manufactured by Brodit AB in Sweden, are custom made and attach to vehicle specific ProClip dashboard mounts. To attach your Nuvifone cradle to the Vehicle Mount Adapter, simply remove the windshield suction cup mount from the cradle then snap the cradle onto the ball of the Vehicle Mount Adapter. Once the cradle is attached to the two part ProClip solution (Vehicle Mount Adapter plus Vehicle Mount), your Nuvifone can be more securely and conveniently positioned on your dashboard.

“Securely and conveniently mounting handheld devices like the Nuvifone, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA. “We offer mounting solutions that are custom designed for virtually every car in the world, and all popular handheld devices.”

ProClip Vehicle Mount Adapters may also be attached to other manufacturers’ mounts or any flat surface. Mounting solutions are also available for other Garmin products. All products available at www.proclipusa.com

ProClip Vehicle Mounts provide the mounting platform to attach any ProClip holder or adapter. The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today’s global market. The mount clips into the dashboard seams, providing a very sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle’s interior!

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so that the consumer can mount their own electronic devices, such as mobile phones, MP3 players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

ProClip USA receives "Best car mount" award in iProng Magazine's "The Very Best of 2009—top iPhone and iPod accessories"

"This is the only iPhone/iPod car mounting solution that works well in every car, because they send you a different mounting kit depending on your car. And the option of padded, swivel, and dock connector mounts seals the deal."—iProng Magazine

CHICAGO--(BUSINESS WIRE)--ProClip USA, Inc. today announced a variety of device holders designed to securely mount the TomTom XXL to car, truck and SUV dashboards and consoles.

These holders, designed and manufactured by Brodit AB in Sweden, are custom made and attach to vehicle specific ProClip dashboard mounts. Once this two part solution (Device Holder plus Vehicle Mount) is attached to the dashboard, the solution provides better viewing and easier access. ProClip holders may also be attached to other manufacturers’ vehicle mounts or any other flat surface.

“Securely and conveniently mounting handheld devices like the new TomTom XXL, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA. “We offer mounting solutions that are custom designed for virtually every car in the world, and all popular handheld devices.”

TomTom XXL holders feature a variety of options including:

• Tilt Swivel
• Mini USB Pass-Through for Connector
• Cigarette Lighter Charging Cable and Mini USB Pass-Through for TMC Connection
• Fixed Installation Charging Cable and Mini USB Pass-Through for TMC Connection

Holders are also available for other TomTom GPS Navigation units. All products available at www.proclipusa.com.

The ProClip Vehicle Mount provides the mounting platform to attach any of the ProClip holders. The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today’s global market. The mount clips into the dashboard seams, providing a very sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle’s interior!

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so that the consumer can mount their own electronic devices, such as mobile phones, MP3 players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

The much anticipated mounts for the new 2010 Chevy Camaro dashboard are available for sale. There are currently two options available:

Item No. 854376 - ProClip Center Mount

Item No. 834377 - ProClip Console Mount

These two, new, safe and sturdy options will work with any of the Device Holders ProClip sells. Stop by www.proclipusa.com to read more about these new mounts and find information on any one of our thousands of parts!

Now you can keep your phone upright and visible on your desk to easily view messages at a glance or pick up a call without first searching through clutter.

ProClip offers a great solution with a choice of two well designed and sleek looking Desk Stands. Check out the New Style and the Classic Style below:

Buy 215396 Desk Stand (New Style)	Buy 215143 Desk Stand (Classic)

After you choose a Desk Stand, then choose a Devce Holder specific to your phone/device. With the hardware provided, attach the Device Holder to the Desk Stand and you have created your own custom Desk Stand.

How do you bring your ProClip Device Holder from your car to your office?

It's simple:

First, add a female Move Clip to your Vehicle Mount and a male Move Clip to the back of your Device Holder. 

Second, add a female Move Clip to your new Desk Stand.

Then, when you get to work, remove your Device Holder from your Vehicle Mount, bring it to your office, and attach your Device Holder to your new Desk Stand.

Click here for more information or to buy the Move Clip System.

You can also use your Desk Stand to hold MP3 players or any other devices you have mounted in your vehicle by adding Move Clips.

If you're looking to put TWO devices on to the same Vehicle Mount, take a look at our Horizontal Extension Plate:

Item No. 215397 - Horizontal Extention Plate

*Not recommended for Angled Mounts or Console Mounts*

If you just want to modify a current or new setup, use these extension plates to optimize viewing:

Item No. 215395 - Left/Right Extension Plate

Item No. 213065 - Vertical Extension Plate

Item No. 215228 - Vehicle Mount Adapter, Angled

Whether choosing a new ProClip Two-Part Mounting Solution or modifying your current one, keep our extension plates in mind for a better and safer driving experience.

Extension Plates in action!

The Move Clip System enables you to quickly and easily attach/detach your device holder to/from your mount. The two core components of the Move Clip System are:

1. the Female Plate that attaches to the mount, and 

2. the Male Plate that attaches to the back of device holder or the device itself.

Once you attach the Female Plate to the mount and then attach the Male Plate to the back of the device holder you can then slide the Male Plate into the Female Plate making a secure connection. Reverse action to detach the holder from the mount.

Some common uses for the Move Clip System are:

•  To detach your holder from the mount in your car and attach your holder to the mount in your company or spouse’s car

•  To swap the holder for your cell phone with a holder for your GPS etc.

•  To swap locations of your devices within your vehicle (if you have multiple mounts in your vehicle)

ProClip USA releases Vehicle Dashboard Mounts for the newly released 2009 and 2010 vehicle models.

Over the last few weeks we have released many new ProClip mounts. As always we make 2-3 mounts for each vehicle so a number of devices can be kept easily and securely on the dash. Many more mounts will be coming in early August. Among them the mounts for the new 2010 Toyota Prius, 2010 Chevrolet Camaro, Ford Mustang and Ford Fusion.

The latest releases already available on our web site are:

2009     Chevrolet Cruze

2009     Dodge Ram 1500

2010     Dodge Ram 2500/3500

2009     Ford F-150

2009     Ford E-series/Econoline/Cargo Van 

2009     Ford Ka

2009     Honda Fit

2009     Honda Jazz

2009     Honda Pilot

2010     Honda Insight

2009     Jeep Compass

2009     Patriot

2009     Kia Borrego

2010     Lexus RX 350

2009     Lexus LX 570

2009     Mazda RX-8

2009     Nissan 370Z

2009     Nissan Frontier

2009     Peugeot 308

2009     Renault Megane

2009     Suzuki Alto

2009     Toyota Venza

2009     Toyota Verso

2009     Volvo XC60

The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today's global market. The mount clips into the dashboard seams, providing a very sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle's interior!

The ProClip products (mounts, holders, cradles and docs) are designed so that the consumer can mount their own electronic devices to a variety of locations in virtually any vehicle. Products include: Mobile Phones, Smart Phones, PDAs, MP3 players, GPS navigation systems, Satellite Radios, Two-way Radios and Mobile Computers. They provide customers with convenient, secure, easy-to-install mounting solutions that create a safer and more enjoyable driving experience.

Consumer installable mounting solutions make iPhone 3G S easier to view and access while in the car.

CHICAGO—(BUSINESS WIRE)—ProClip USA, Inc. today announced a variety of device holders designed to securely mount the iPhone 3G S to car, truck and SUV dashboards and consoles.

These holders, designed and manufactured by Brodit AB in Sweden, are custom made and attach to vehicle specific ProClip dashboard mounts. Once this two part solution (Device Holder plus Vehicle Mount) is attached, to the dashboard, the solution provides better viewing and easier access. ProClip holders may also be attached to other manufacturers’ vehicle mounts or any other flat surface.

“Securely and conveniently mounting handheld devices like the new iPhone 3G S, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA. “We offer mounting solutions that are custom designed for virtually every car in the world, and all popular handheld devices.”

Holders are also available for earlier generation iPhones. All products available at www.proclipusa.com

The Padded Holder with Tilt Swivel is custom made with a neat and discreet design. It tilts 15 degrees in any direction for optimal viewing. Your iPhone 3G S easily slides in and out of the holder.

The Padded Holder with Tilt Swivel and Charging/USB Cable has a cable permanently attached to the base so when your device is slid into the holder it connects to the cable. Then the cable can either be plugged into your car’s 12V power outlet or any female USB connection. You can easily slide your iPhone in and out of the holder. The Holder angles 15 degrees for optimal viewing.

The Holder with Tilt Swivel and Pass-Through Connector will make docking and undocking, your iPhone 3G S, easier and more convenient. Attach your stereo cable, charging cable or any other iPhone compatible cable, to the bottom of the holder, to create a docking station. Your iPhone 3G S is conveniently on the dash within easy reach and slides in and out of the holder with one hand. The holder is custom made with a neat and discreet design and tilts 15 degrees, in any direction, for optimal viewing.

The Adjustable Holder with Tilt Swivel and Pass-Through Connector has all the benefits of the above Holder with Tilt Swivel and Pass-Through Connector plus it is designed to accommodate your encased iPhone 3G S. This Adjustable Holder will adjust from a width of 2.3" (60mm) to 3.2" (82mm).

The ProClip Vehicle Mount provides the mounting platform to attach any of the ProClip holders. The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today’s global market. The mount clips into the dashboard seams, providing a very sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle’s interior!

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so that the consumer can mount their own electronic devices, such as mobile phones, MP3 players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

For more information please contact:

John Slattery, ProClip USA, Inc.

Telephone: 847-388-7179

Email: jslattery@proclipusa.com

###

We, at ProClip USA, consistently ask for opinions from the community regarding the quality and the user-friendliness of our products. This feedback allows us to adjust and improve our products to your needs. The following three reviews were posted on-line last week and we would like to share them with you!

Crooks.net

Last month ProClip USA held a twitter contest. One of the winners was so happy with the two piece solution he wrote a personal review on his blog, Crooks.net. Please visit Steve's blog and read his full review of the products he won.

RainyDayMagzine.com 

RainyDayMagazine.com  reviewed the ProClip Brodit solution in three parts.  The articles will describe his Navigon navigation solution using our Move Clips and our Left/Right Extension Plate. Check out RainyDayMagazine.com to read their full review.

• RainyDayMagazine.com - Part 1
• RainyDayMagazine.com - Part 2
• RainyDayMagazine.com - Part 3

MobilityMinded.com 

MobilityMinded.com wrote an extensive review of the new HTC Touch Diamond 2 holder with cigarette lighter. This review also includes the purchase process, in which you go through, on the ProClip USA site and the how the Move Clip System works.  Please visit MobilityMinded.com for the full review.