The ProClip Brodit Blog

New TomTom car kit for iPhone, combined with a ProClip Dashboard Mount, makes it easier to view and access your TomTom enabled iPhone.

CHICAGO—(BUSINESS WIRE)—ProClip USA, Inc. today announced that the new TomTom car kit for iPhone is now available, along with a variety of ProClip mounts for mounting your car kit to your car, truck or SUV dashboard or console.

Unlike the original TomTom car kit for iPhone, which has a windshield mount, this new car kit screws onto a vehicle-specific ProClip mount. This lets drivers choose a convenient, permanent location, for their iPhone. “This car kit for iPhone is designed with demanding drivers in mind,” explains Tom Murray, vice president of market development for TomTom. “It offers the fastest, neatest way to secure their iPhone into a car. Plus they get all the features of the original TomTom car kit for iPhone, for the best in-car experience.”

The new car kit broadens the TomTom for iPhone range and improves the in-car navigation experience for iPhone users with a GPS booster for uninterrupted navigation—even in built-up areas. The built-in microphone allows drivers to make and answer phone calls while the integrated speaker ensures navigation instructions are always clear—allowing busy drivers get to the right place safely.  

An in-car charger keeps the iPhone battery charged and for a neater integration, a car electronics professional can provide a direct power connection to the car battery. The kit’s audio out connector lets drivers play music over their car stereo and fades music out when receiving calls or navigation instructions.

“We’re happy to partner with TomTom to offer this new car kit. Securely and conveniently mounting devices like the TomTom  car kit for iPhone, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA.

ProClip Vehicle Mounts provide the mounting platform to attach any ProClip holder or adapter such as the TomTom iPhone car kit and active docks. The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today’s global market. The mount clips into the dashboard seams, providing a sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle’s interior.

Mounting solutions are also available for other TomTom GPS devices. All products available at both www.proclipusa.com and tomtom-proclip.com

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so the consumer can mount their own electronic devices, such as mobile phones, MP3 players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

Consumer installable mounting solutions make mobile phones easier to view and access while in the car.

CHICAGO—(BUSINESS WIRE)—Tomorrow, at the International CES, ProClip USA, Inc. will announce the launch of new device holders designed to securely mount the newest cellular phones to car, truck and SUV dashboards and consoles. Holders for the new Motorola Droid, BlackBerry Storm2 and HTC Touch Pro2 will be displayed at the ProClip booth, #303, throughout this year’s event.

These holders, designed and manufactured by Brodit AB in Sweden, are custom made for cell phones and attach to vehicle specific ProClip dashboard mounts. Once this two part solution (Device Holder plus Vehicle Mount) is attached to the vehicle dashboard, the solution provides better viewing and easier access. ProClip holders may also be attached to other manufacturers’ vehicle mounts or any flat surface.

“Securely and conveniently mounting handheld devices, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA. “We offer mounting solutions that are custom designed for virtually every car in the world, and all popular handheld devices.”

The Holder with Tilt Swivel is custom made with a neat and discreet design. It tilts 15 degrees in any direction for optimal viewing. The device easily slides in and out of the holder.

Other holder options may include Tilt Swivel and Cigarette Lighter Charger or Tilt Swivel and Straight Cable for Fixed Installation. All available options will be on display during the show. Holders for other devices such as iPhones, iPods, GPS car navigation and satellite radios will also be on display.

All products are currently available for purchase at www.proclipusa.com

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so that the consumer can mount their own electronic devices, such as mobile phones, MP3  players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

ProClip USA receives "Best car mount" award in iProng Magazine's "The Very Best of 2009—top iPhone and iPod accessories"

"This is the only iPhone/iPod car mounting solution that works well in every car, because they send you a different mounting kit depending on your car. And the option of padded, swivel, and dock connector mounts seals the deal."—iProng Magazine

Now you can keep your phone upright and visible on your desk to easily view messages at a glance or pick up a call without first searching through clutter.

ProClip offers a great solution with a choice of two well designed and sleek looking Desk Stands. Check out the New Style and the Classic Style below:

Buy 215396 Desk Stand (New Style)	Buy 215143 Desk Stand (Classic)

After you choose a Desk Stand, then choose a Devce Holder specific to your phone/device. With the hardware provided, attach the Device Holder to the Desk Stand and you have created your own custom Desk Stand.

How do you bring your ProClip Device Holder from your car to your office?

It's simple:

First, add a female Move Clip to your Vehicle Mount and a male Move Clip to the back of your Device Holder. 

Second, add a female Move Clip to your new Desk Stand.

Then, when you get to work, remove your Device Holder from your Vehicle Mount, bring it to your office, and attach your Device Holder to your new Desk Stand.

Click here for more information or to buy the Move Clip System.

You can also use your Desk Stand to hold MP3 players or any other devices you have mounted in your vehicle by adding Move Clips.

If you're looking to put TWO devices on to the same Vehicle Mount, take a look at our Horizontal Extension Plate:

Item No. 215397 - Horizontal Extention Plate

*Not recommended for Angled Mounts or Console Mounts*

If you just want to modify a current or new setup, use these extension plates to optimize viewing:

Item No. 215395 - Left/Right Extension Plate

Item No. 213065 - Vertical Extension Plate

Item No. 215228 - Vehicle Mount Adapter, Angled

Whether choosing a new ProClip Two-Part Mounting Solution or modifying your current one, keep our extension plates in mind for a better and safer driving experience.

Extension Plates in action!

MobilityMinded.com reviewed the new iPhone Navigon Navigation software using the newly designed ProClip Brodit holder for the iPhone 3G(S).

This new design of the iPhone holder has the following improved features: 

1. In this new design the cable exits on the back of the holder for a cleaner look and installation.
2. You can choose to connect the cig-plug to the vehicle's 12volt socket or the USB cable to the USB connector in the vehicle. 
3. You can securely use your iPhone in horizontal position with the added bracket. Ideal for using Navigation software in horizontal view.
4. It is also padded for scratch protection.

This holder is available at ProClip USA and is compatible with the iPhone 3G and 3GS.

The ProClip Brodit Device Holder is one part of the ProClip 2 Part Solution. Find your two part solution at www.proclipusa.com.

In the latest summer issue of the iPhone Life magazine, our adjustable iPhone holder--with a pass-through connector for the 3G or 3GS iPhone--was featured as, "allows you to mount your iPhone conveniently on your vehicle's dashboard within easy reach." Now in its third issue, "iPhone Life" magazine is a great resource for all your iPhone and iTouch news, tips and tricks. Applications and third party accessories are just some of the many items covered in the magazine. 

Click here to receive a free online issue. Click here to subscribe to the printed version. The best offer right now is $24.97 for two years which will give you four issues a year.

Please visit ProClip USA to check out all of our iPhone 3G and 3GS holders.

Consumer installable mounting solutions make iPhone 3G S easier to view and access while in the car.

CHICAGO—(BUSINESS WIRE)—ProClip USA, Inc. today announced a variety of device holders designed to securely mount the iPhone 3G S to car, truck and SUV dashboards and consoles.

These holders, designed and manufactured by Brodit AB in Sweden, are custom made and attach to vehicle specific ProClip dashboard mounts. Once this two part solution (Device Holder plus Vehicle Mount) is attached, to the dashboard, the solution provides better viewing and easier access. ProClip holders may also be attached to other manufacturers’ vehicle mounts or any other flat surface.

“Securely and conveniently mounting handheld devices like the new iPhone 3G S, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA. “We offer mounting solutions that are custom designed for virtually every car in the world, and all popular handheld devices.”

Holders are also available for earlier generation iPhones. All products available at www.proclipusa.com

The Padded Holder with Tilt Swivel is custom made with a neat and discreet design. It tilts 15 degrees in any direction for optimal viewing. Your iPhone 3G S easily slides in and out of the holder.

The Padded Holder with Tilt Swivel and Charging/USB Cable has a cable permanently attached to the base so when your device is slid into the holder it connects to the cable. Then the cable can either be plugged into your car’s 12V power outlet or any female USB connection. You can easily slide your iPhone in and out of the holder. The Holder angles 15 degrees for optimal viewing.

The Holder with Tilt Swivel and Pass-Through Connector will make docking and undocking, your iPhone 3G S, easier and more convenient. Attach your stereo cable, charging cable or any other iPhone compatible cable, to the bottom of the holder, to create a docking station. Your iPhone 3G S is conveniently on the dash within easy reach and slides in and out of the holder with one hand. The holder is custom made with a neat and discreet design and tilts 15 degrees, in any direction, for optimal viewing.

The Adjustable Holder with Tilt Swivel and Pass-Through Connector has all the benefits of the above Holder with Tilt Swivel and Pass-Through Connector plus it is designed to accommodate your encased iPhone 3G S. This Adjustable Holder will adjust from a width of 2.3" (60mm) to 3.2" (82mm).

The ProClip Vehicle Mount provides the mounting platform to attach any of the ProClip holders. The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today’s global market. The mount clips into the dashboard seams, providing a very sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle’s interior!

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so that the consumer can mount their own electronic devices, such as mobile phones, MP3 players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

For more information please contact:

John Slattery, ProClip USA, Inc.

Telephone: 847-388-7179

Email: jslattery@proclipusa.com

###

We, at ProClip USA, consistently ask for opinions from the community regarding the quality and the user-friendliness of our products. This feedback allows us to adjust and improve our products to your needs. The following three reviews were posted on-line last week and we would like to share them with you!

Crooks.net

Last month ProClip USA held a twitter contest. One of the winners was so happy with the two piece solution he wrote a personal review on his blog, Crooks.net. Please visit Steve's blog and read his full review of the products he won.

RainyDayMagzine.com 

RainyDayMagazine.com  reviewed the ProClip Brodit solution in three parts.  The articles will describe his Navigon navigation solution using our Move Clips and our Left/Right Extension Plate. Check out RainyDayMagazine.com to read their full review.

• RainyDayMagazine.com - Part 1
• RainyDayMagazine.com - Part 2
• RainyDayMagazine.com - Part 3

MobilityMinded.com 

MobilityMinded.com wrote an extensive review of the new HTC Touch Diamond 2 holder with cigarette lighter. This review also includes the purchase process, in which you go through, on the ProClip USA site and the how the Move Clip System works.  Please visit MobilityMinded.com for the full review.

The summer of 2009 is in full swing with the new Apple iPhone 3GS. Record sales of the new iPhone were reported this past Monday and our customers are asking for the new 3GS holders, cradle and docks!

Check out a few ways our 2 part mount and holder solution works!

Put together your solution at www.proclipusa.com.

5 new links to 3GS holders,cradles and docks:

• iPhone 3GS padded holder, cradle, dock with tilt swivel
• iPhone 3GS padded holder,cradle and dock
• iPhone 3GS adjustable holder,cradle, dock with tilt swivel
• iPhone 3GS padded holder, cradle, dock with tilt swivel and Cigarette Lighter Charger
• iPhone 3GS adjustable holder, cradle, dock with tilt swivel and pass-through connector

Let us know what you think of the new ProClip 3GS holders and iPhone 3GS!