The ProClip Brodit Blog

The new small adjustable holder from ProClip USA can be a great alternate solution if we don't have a custom holder for your specific device.

This new adjustable holder is very easy to use and makes having your mobile device in the car a convenience. The adjustable holder is designed to hold smaller devices with or without a skin case!

With some devices buttons and ports on the side may be covered. To see the devices that have been tested and will work with this adjustable holder look under the "Compatibility" tab on the  product page.

The Holder will adjust from a width of 1.9 inches (48 mm) to 2.48 inches (63mm). The thickness of the device the holder can hold is from 0.19 inches (5mm) to 0.39 inches (10 mm).

Below is a small video showing you how the adjustment will work for different devices.

SEE LINK

The small adjustable holder is available at ProClip USA for $39.99

Now you can keep your phone upright and visible on your desk to easily view messages at a glance or pick up a call without first searching through clutter.

ProClip offers a great solution with a choice of two well designed and sleek looking Desk Stands. Check out the New Style and the Classic Style below:

Buy 215396 Desk Stand (New Style)	Buy 215143 Desk Stand (Classic)

After you choose a Desk Stand, then choose a Devce Holder specific to your phone/device. With the hardware provided, attach the Device Holder to the Desk Stand and you have created your own custom Desk Stand.

How do you bring your ProClip Device Holder from your car to your office?

It's simple:

First, add a female Move Clip to your Vehicle Mount and a male Move Clip to the back of your Device Holder. 

Second, add a female Move Clip to your new Desk Stand.

Then, when you get to work, remove your Device Holder from your Vehicle Mount, bring it to your office, and attach your Device Holder to your new Desk Stand.

Click here for more information or to buy the Move Clip System.

You can also use your Desk Stand to hold MP3 players or any other devices you have mounted in your vehicle by adding Move Clips.

The numerous brands and models of mobile phones are creating a web of confusion for the consumer. It is even more confusing in the U.S. because carriers like AT&T, T-Mobile, Sprint and Verizon sometimes use their carrier name as the brand.

HTC is a little more confusing, they create different casings (shells) for some models carrier specific. An example is the new HTC Touch Pro2! The European version is different from the T-Mobile, Sprint and Verizon versions in the U.S. This makes our ProClip holders for the HTC Touch Pro2 different for each carrier.

To help simplify these issues, we are now listing each current and future ProClip holder by carrier just as their mobile phones are described on their websites.

Consumer installable mounting solutions make iPhone 3G S easier to view and access while in the car.

CHICAGO—(BUSINESS WIRE)—ProClip USA, Inc. today announced a variety of device holders designed to securely mount the iPhone 3G S to car, truck and SUV dashboards and consoles.

These holders, designed and manufactured by Brodit AB in Sweden, are custom made and attach to vehicle specific ProClip dashboard mounts. Once this two part solution (Device Holder plus Vehicle Mount) is attached, to the dashboard, the solution provides better viewing and easier access. ProClip holders may also be attached to other manufacturers’ vehicle mounts or any other flat surface.

“Securely and conveniently mounting handheld devices like the new iPhone 3G S, without damaging a vehicle’s interior, is what we do best,” says Bjorn Spilling, president of ProClip USA. “We offer mounting solutions that are custom designed for virtually every car in the world, and all popular handheld devices.”

Holders are also available for earlier generation iPhones. All products available at www.proclipusa.com

The Padded Holder with Tilt Swivel is custom made with a neat and discreet design. It tilts 15 degrees in any direction for optimal viewing. Your iPhone 3G S easily slides in and out of the holder.

The Padded Holder with Tilt Swivel and Charging/USB Cable has a cable permanently attached to the base so when your device is slid into the holder it connects to the cable. Then the cable can either be plugged into your car’s 12V power outlet or any female USB connection. You can easily slide your iPhone in and out of the holder. The Holder angles 15 degrees for optimal viewing.

The Holder with Tilt Swivel and Pass-Through Connector will make docking and undocking, your iPhone 3G S, easier and more convenient. Attach your stereo cable, charging cable or any other iPhone compatible cable, to the bottom of the holder, to create a docking station. Your iPhone 3G S is conveniently on the dash within easy reach and slides in and out of the holder with one hand. The holder is custom made with a neat and discreet design and tilts 15 degrees, in any direction, for optimal viewing.

The Adjustable Holder with Tilt Swivel and Pass-Through Connector has all the benefits of the above Holder with Tilt Swivel and Pass-Through Connector plus it is designed to accommodate your encased iPhone 3G S. This Adjustable Holder will adjust from a width of 2.3" (60mm) to 3.2" (82mm).

The ProClip Vehicle Mount provides the mounting platform to attach any of the ProClip holders. The ProClip Vehicle Mount is the only vehicle specific, consumer installable mounting bracket in today’s global market. The mount clips into the dashboard seams, providing a very sturdy and tight fit. Average installation time is 2 minutes. No dismantling of the dashboard is required and there is no damage to the vehicle’s interior!

About ProClip USA, Inc.

ProClip USA, Inc. is the exclusive North American distributor of ProClip in-vehicle device mounting solutions and accessories. ProClip products are designed so that the consumer can mount their own electronic devices, such as mobile phones, MP3 players, GPS navigation systems, and satellite radios, to a variety of locations in virtually any vehicle. The company's mission is to supply customers with convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience.

For more information please contact:

John Slattery, ProClip USA, Inc.

Telephone: 847-388-7179

Email: jslattery@proclipusa.com

###

ProClip USA, has new holders, cradles and docks available this week, which include the popular HTC Snap, the HTC Magic, and the HTC Touch Pro from Verizon.

The HTC Touch Pro was released in the US with 3 different casings. The HTC Touch Pro from Sprint and the HTC Fuze/Touch Pro from AT&T holders are already available.  Now ProClip USA has holders for the Verizon version of the HTC Touch Pro! All of these holders are offered with vertical or horizontal viewing options.

Here's the lineup for the Verizon Touch Pro holders:

• Standard Holder
• Standard Holder with Tilt swivel
• Charging holder with Tilt Swivel and Cigarette Lighter Plug
• Charging Holder with Tilt Swivel, for fixed installation
  
• Holder with Tilt Swivel with a 3 or 40 cm cable connected to the 3 in 1 connector.

The HTC Snap and Magic have new holders as well! The newly released HTC Snap has a Standard Holder and Standard Holder with Tilt Swivel, Standard with Tilt Swivel, and Cigarette Lighter Charging holder and Charging Holder with Tilt Swivel, for fixed installation. The HTC Magic has the Standard, Standard with Tilt Swivel, and Cigarette Lighter Charging holder and Charging Holder with Tilt Swivel, for fixed installation.

Please follow the links below to see all of the custom holders available for these devices:

• HTC Snap
• HTC Magic 
• HTC Touch Pro (Verizon)
• HTC Touch Pro (Sprint)
• HTC Touch Pro
• AT&T Fuze